Sanwa MX-3X Specifications download pdf (Page 101)

Settings | Control Panel Options 85

E-EQ-MX3XRG-H MX3X Reference Guide

Battery

Access: Start | Settings | Control Panel | Battery

View the status of the Main and Backup batteries.

Battery

Voltage:

Main:

Backup:

Battery

12.121 V (raw=3485)

5.099 V (raw=2167)

Status:

Jacked

Charge

Discharge

Figure 3-3 Battery

The Battery tab shows the status and the percentage of power left in the main battery. It also

shows the status of the backup battery. The listed values cannot be changed by the user.

LXE recommends Discharging and Recharging the backup battery twice a year. Use the Charge or

Discharge buttons to charge and discharge the backup battery:

To Charge Tap the Charge button. The Discharge button text changes to “Off”. When the

backup battery is charging, tap the Off button to stop the Charge process.

To Discharge Tap the Discharge button. The Charge button text changes to “Off”. When the

backup battery is discharging, tap the Off button to stop the Discharge process.

The Main Battery is charged only when an AC adapter is connected via the endcap, the MX3X is

docked in a powered cradle or when the Main Battery is removed from the MX3X and placed in

the MX3 Multi-charger.

Bluetooth Manager

Note: May or may not be available in every MX3X version.

Access: Start | Settings | Control Panel | Bluetooth Device Properties

Set the parameters for a Bluetooth radio. Bluetooth Manager, Bluetooth service or options are not

available for all MX3X devices or in all MX3X software releases.

Factory Default Settings

All Found Devices Untrusted

Tap the Scan Device button to locate Bluetooth devices in your wireless area. Tap the “?” button

and follow the instructions in the Help file to authenticate Bluetooth devices in your area.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 315 316

No comments

Sanwa MX-3X Specifications Page 101