Sanwa MX-3X Specifications download pdf (Page 32)

16 Getting Started

MX3X Reference Guide E-EQ-MX3XRG-H

Connect MX3X Audio Jack (Optional)

The audio jack is located on the endcap.

Figure 1-17 Connect Audio Jack

Insert the 2.5mm barrel end of the connector into the audio jack on the endcap and push the

connector in firmly. See section titled “Set the Audio Speaker Volume”.

Note: The audio option draws power from the battery.

Power Button

Note: Refer to the section titled “Power Modes” later in this chapter for information relating to

the power states of the mobile device.

Figure 1-18 Power Button

The power button is located above the ESC key on the keypad. When a battery is inserted in the

mobile device press the Power button.

Quickly tapping the Power button places the device immediately in Suspend mode. Quickly

tapping the Power button again, or touching the screen, immediately returns the device from

Suspend.

When the Windows desktop is displayed or an application begins, the power up (or reboot)

sequence is complete.

Please refer to the section titled “Power Modes” later in this guide for a list of the kinds of

activities (Primary Events) that will return the device from Suspend Mode.

Restart Sequence

Tap Start | Run, then type warmboot in the textbox and press Enter. If the touchscreen is not

accepting taps or needs recalibration, press <Ctrl>+<Esc> to force the Start Menu to appear.

When the Windows CE desktop is displayed or an application begins, the power up (or restart)

sequence is complete. If you have previously saved your settings, they will be restored on reboot.

Any RFID tag data retrieved and not saved is lost during a reboot or reset.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 315 316

No comments

Sanwa MX-3X Specifications Page 32