Sanwa MX-3X Specifications download pdf (Page 151)

E-EQ-MX3XRG-H MX3X Reference Guide

Chapter 4 Scanner

Introduction

Access: Start | Settings | Control Panel | Scanner

Set scanner keyboard wedge parameters, enable or disable symbologies from being scanned,

scanner icon appearance, active scanner port, and scan key settings. Assign baud rate, parity, stop

bits and data bits for available COM ports.

Determine Your Scanner Software Version

Integrated Scanner Programming Guide and the Reset All barcode. After scanning

the Reset All (to factory defaults) barcode for the specific scan engine, the next step is

Start | Control Panel | Scanner. Tap the OK button and close the scanner applet.

This action will synchronize all scanner formats.

Note: Scanner control panel options are based on the installed software version levels, driver

and OS versions in MX3X devices. Your Scanner options may or may not be as described

in this section. Contact your LXE representative to obtain the most current software and

drivers for your mobile device. To identify the software version, tap the “About” icon in

the Control Panel.

Scanner Control Menu Structure Versions Tabs Go to . . . .

Main COM1 COM2 COM3Keys

Chapter 3, “System

Configuration”, section

titled “Scanner”

This chapter, section

titled “Advanced”.

This chapter, section

titled “Barcode

Manipulation”.

Figure 4-1 Determine Your Scanner Software Version

Scanner configuration can be changed using the Scanner Control Panel or via the LXE API

functions. While the changed configuration is being read, the Scanner LED is solid amber. The

scanner is not operational during the configuration update.

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 315 316

No comments

Sanwa MX-3X Specifications Page 151