Sanwa MX-3X Specifications download pdf (Page 79)

Display 63

E-EQ-MX3XRG-H MX3X Reference Guide

Cleaning the Glass Display/Scanner Aperture

Note: These instructions are for components made of glass. If there is a removable protective

film sheet on the display screen, remove the film sheet before cleaning the screen.

Keep fingers and abrasive or sharp objects away from the scan aperture and display. If the glass

becomes soiled or smudged, clean only with a standard household cleaner such as Windex(R)

without vinegar or use Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based

cleaning fluids since they may result in damage to the glass surface. Use a clean, damp, lint-free

cloth. Do not scrub optical surfaces. If possible, clean only those areas which are soiled.

Lint/particulates can be removed with clean, filtered canned air.

Applying the Protective Film to the Display

First, clean the display of fingerprints, lint particles, dust and smudges.

Remove the protective film from it’s container. Remove any protective backing from the film

sheet by lifting the backing from a corner of the film. Discard the backing.

Apply the film to the screen starting at one side and smoothing it across the display. If air bubbles

appear, raise the film slightly and continue smoothing the film across the display until it covers the

glass surface of the display.

If dust, lint or smudges are trapped between the protective film and the glass display, remove the

protective film, clean the display and apply the protective film again.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 315 316

No comments

Sanwa MX-3X Specifications Page 79