Sanwa MX-3X Specifications download pdf (Page 252)

236 Multi-Application Configuration

MX3X Reference Guide E-EQ-MX3XRG-H

Security Panel

Figure 6-4 Security Panel – Multi-Application

Hotkey

Specify the hotkey sequence that triggers AppLock to switch between administrator and user

modes and the password required to enter Administrator mode. The default hotkey sequence is

Shift+Ctrl+A.

A 2

key keypress is an invalid keypress for a hotkey sequence.

Move the cursor to the Hot Key text box. Enter the new hot key sequence by first pressing the

Shift state key followed by a normal key. The hotkey selected must be a key sequence that the

application being locked does not use. The hotkey sequence is intercepted by AppLock and is not

passed to the application.

Input from the keyboard or Input Panel is accepted with the restriction that the normal key must be

pressed from the keyboard when switching modes. The hotkey sequence is displayed in the Hot

key text box with “Shift”, “Alt”, and “Ctrl” text strings representing the shift state keys. The

normal keyboard key completes the hotkey sequence. The hotkey must be entered via the keypad.

Some hotkeys cannot be entered via the Input Panel. Also, hotkeys entered via the SIP are not

guaranteed to work properly when switching operational modes.

For example, if the ‘Ctrl’ key is pressed followed by ‘A’, “Ctrl+A” is entered in the text box. If

another key is pressed after a normal key press, the hotkey sequence is cleared and a new hotkey

sequence is started.

A normal key is required for the hotkey sequence and is unlike pressing the normal key during a

mode switch; this key can be entered from the SIP when configuring the key. However, when the

hotkey is pressed to switch modes, the normal key must be entered from the keypad; it cannot be

entered from the SIP.

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 315 316

No comments

Sanwa MX-3X Specifications Page 252