Sanwa MX-3X Specifications download pdf (Page 171)

Advanced 155

E-EQ-MX3XRG-H MX3X Reference Guide

Main Tab

Note: Scanner control panel options are based on the installed software version levels, driver

and OS versions in MX3X devices. Your Scanner options may or may not be as described

in this section. Contact your LXE representative to obtain current software and drivers

for your mobile device.

Figure 4-12 Advanced – Main Tab

Parameter Default Options

Port 1 Internal

Disabled, COM1, COM3, Internal, Cradle, Bluetooth, Output

Enable.

Port 2 Disabled

Disabled, RFID Internal, COM3, Internal, Cradle, Bluetooth,

Output Enable

Power Port 1

while Asleep

Disabled Enabled, Disabled. If “Power Port 1 while asleep” is checked,

whichever serial port is enabled as Port 1 will remain powered

while the device is in Suspend, at the cost of reduced battery life.

This allows a tethered scanner to wake the device by pressing the

trigger on the scanner.

Send Key

Messages

Enabled Enabled, Disabled. If “Send Key Messages …” is checked any

data scan is converted to keystrokes and sent to the active window.

When this box is not checked, the application will need to use the

set of LXE Scanner APIs to retrieve the data from the scanner

driver. Note that this latter method is significantly faster than

using “Wedge”.

Adjust the settings and tap the OK box to save the changes. The changes take effect immediately.

The Scan buttons have no effect on tethered external scanners connected to the RS-232 connector

on the endcap.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 315 316

No comments

Sanwa MX-3X Specifications Page 171