Sanwa MX-3X Specifications download pdf (Page 185)

E-EQ-MX3XRG-H MX3X Reference Guide

Chapter 5 Wireless Network Configuration

Introduction

The MX3X mobile device offers a choice of Cisco, Symbol and Summit clients. The Summit

client device is an 802.11g network card. The Cisco and Symbol client network cards are 802.11b

clients. They can be configured for the security types listed below.

Certificates are necessary for many of the WPA authentications. Please refer to the “Certificates”

section at the end of this chapter for more information on generating and installing certificates.

Please refer to the table below for the security options supported for each network client type.

Type

Security Options

Supported

Summit Client Cisco Client Symbol Client

None Yes Yes Yes

EAP-FAST Yes

No No

EAP-TLS No* Yes No

LEAP Yes Yes Yes

PEAP-GTC Yes Yes No

PEAP-MSCHAP Yes Yes No

WEP Yes Yes Yes

WPA/LEAP Yes Yes No

WPA-PSK Yes Yes No

* Not available when this manual was published. Check with your LXE representative for current

availability.

Prerequisites

• Network SSID or ESSID number of the Access Point

• WEP or LEAP Authentication Protocol Keys

• The Summit profile settings for Auth Type, EAP Type and Encryption depend on the

security option chosen.

Please refer to the “LXE Security Primer” to prepare the Authentication Server

and Access Point for MX3X communication. It is available on the LXE

Manuals CD and the LXE ServicePass website.

It is important that all dates are correct on CE computers when using any type

of certificate. Certificates are date sensitive and if the date is not correct

authentication will fail.

It may be necessary to upgrade radio drivers in order to use certain Summit

Client Utility (SCU) features described in this chapter. Please contact your

LXE representative for details.

EAP-FAST is supported only with automatic PAC provisioning.

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 315 316

No comments

Sanwa MX-3X Specifications Page 185